NSS Wiki - User contributions [en]

Raspberry Pi

2022-08-30T22:24:33Z

Lennarz: /* Login */

*The vacuum chamber upstream of the ANASEN main chamber is used to mount beam tuning diagnostics; a camera, a silicon detector and a phosphor screen.
*The silicon and the phosphor screen are mounted next to each other on a manual drive.
*The camera is mounted on a plastic holder at the bottom flange outside the beam path and tilted towards the phosphor screen to facilitate beam tuning. Next to the camera is an LED, which can be turned on to view the inside of the chamber and check detector/phosphor screen position and adjust the camera settings. '''Make sure to unbias the detector before turning on the LED!'''
*The camera is controlled via a raspberry pi
*

=Connecting the camera=
*The little ribbon cables are a little tricky. They have to be inserted in a particular orientation. The best way to see is just to look at where the metal pins are on the cable and line that up to the contacts.
*The LED mounted next to the camera takes 5V (lemo connection)
*There is a micro-HDMI on the raspberry pi. Use the ethernet port to talk to the pi.
*Connect the Raspberry Pi directly to monitor, mouse and keyboard.

[[File:raspberrypi_1.jpg|500px|Raspberry Pi.]]

[[File:raspberrypi.jpg|500px|Raspberry Pi connection at flange.]]

=Login=
*The raspberry pi is running raspberry pi OS (previously Raspbian) and is based on debian linux
*To connect to the pi remotely (provided it is registered on the network and connected to the ethernet), open a shell and ssh into it:
<code>ssh -Y pi@anasen01.triumf.ca</code>
*Or login directly when monitor, mouse and keyboard are attached to the pi
*Ask Annika or Martin for password

*Open a terminal
*To run the camera.py script do:

<code>raspivid -t 0</code>

*You can change zoom settings in the python script

=VNC viewer=
*For Operators to use the camera via vnc to tune to the viewscreen, they need a device with 'real vnc' viewer installed. This runs on anything, even on an android phone.
*To connect, use the IP address: 142.90.121.216. User name is 'pi'. Password is the same as to ssh into the raspberry pi. Ask Annika or Martin for the password.

Closeoutmeeting S2006

2022-07-06T19:32:19Z

Lennarz: Created page with "S2006 Close-out meeting - July 7th, 2022 ISAC II counting room Present: Spencer Kiy, Alessia di Pietro, Marisa Gulino, Annika Lennarz *Communication excellent! Experimenters were very happy with support from TRIUMF *Marisa estimated number of beam hours of what we got from epics read out: 44 hrs in total at average ~10epA *Sometimes 500epA. Maybe signs of discharge at cup? Can't be real *~3e6 pps of 26Al, assuming the same ratio of 26Mg and 26Al was the same as at the..."

S2006 Close-out meeting - July 7th, 2022
ISAC II counting room

Present: Spencer Kiy, Alessia di Pietro, Marisa Gulino, Annika Lennarz

*Communication excellent! Experimenters were very happy with support from TRIUMF
*Marisa estimated number of beam hours of what we got from epics read out: 44 hrs in total at average ~10epA
*Sometimes 500epA. Maybe signs of discharge at cup? Can't be real
*~3e6 pps of 26Al, assuming the same ratio of 26Mg and 26Al was the same as at the beginning
*30% 26Al and 70% 26Mg
*in future singly charged 45kV, 1+ and then boost with RF cavity + 8kV
*What's the number for the online experiment
*next opportunity: May 2023, 23Na stable beam at DRAGON
*Discussion on EEC priorities
*Q-value separation in event reconstruction, second channel may not be able to be cleaned up.
*post stripper needed for 12C reduction
*Send survey!
*Target ladder to be stored
*Boxes left here, labeled with detectors, one wheel is broken, 2 boxes are empty
*One box has cables
*All expensive stuff is in one box
*Just prea-mplifiers for Neven need to be send back

Meeting Minutes

2022-07-06T19:28:55Z

Lennarz:

{| class="wikitable"
!colspan="11"|Meeting minutes
|-
|'''Date'''
|'''Author'''
|'''Minutes'''
|-
|2022-06-10
|Annika
|[[Closeoutmeeting_June10th2022 | Minutes S1880]]
|-
|yyyy-mm-dd
|2022-06-20
|[[Closeoutmeeting_S1819 | Minutes S1819]]
|-
|yyyy-mm-dd
|Martin
|[[xxx | Minutes S1758]]
|-
|2022-07-06
|Annika
|[[Closeoutmeeting_S2006 | Minutes S2006]]
|}

Logbook

2022-07-06T17:27:25Z

Lennarz: Created page with "S2006 *Marisa, Alessia *Communication excellent! *estimate of what we got from epics read out *44 hrs in total ~10epA *Sometimes 500epA *~3e6 pps, assuming the same ratio of 26Mg and 26Al was the same as at the beginning *30% 26Al and 70% 26Mg *in future singly charged 45kV, 1+ and then boost with RF cavity + 8kV *What's the number for the online experiment *next opportunity: May 2023, 23Na stable beam at DRAGON *Discussion on EEC priorities *Q-value separation in event..."

S2006
*Marisa, Alessia
*Communication excellent!
*estimate of what we got from epics read out
*44 hrs in total ~10epA
*Sometimes 500epA
*~3e6 pps, assuming the same ratio of 26Mg and 26Al was the same as at the beginning
*30% 26Al and 70% 26Mg
*in future singly charged 45kV, 1+ and then boost with RF cavity + 8kV
*What's the number for the online experiment
*next opportunity: May 2023, 23Na stable beam at DRAGON
*Discussion on EEC priorities
*Q-value separation in event reconstruction, second channel may not be able to be cleaned up.
*post stripper needed for 12C reduction
*
*Send survey
*Target ladder to be stored
*Boxes left here, labeled with detectors, one wheel is broken, 2 boxes are empty
*One box has cables
*All expensive stuff is in one box
*Just prea-mplifiers for Nevin
*

Main Page

2022-06-20T18:27:26Z

Lennarz: /* Useful Links */

Welcome to the Nuclear Science Specialists Group wiki page!

Consult the [https://www.mediawiki.org/wiki/Special:MyLanguage/Help:Contents User's Guide] for information on using the wiki software.

==General==

[[xyz1]]

[[xyz2]]

[[xyz3]]

==Inventory==

[[test1]]

==Useful information==

[[beamline specs]]

==Experiments==

[[TUDA-I]]

[[TUDA-II]]

[[ANASEN]]

[[BeEST]]

==Documentation==
[[Released Documents]]

[[Other Documents]]

[[Logbook]]

[[Meeting Minutes]]

[[Procedures]]

==Useful Links==
[https://web.accel.triumf.ca/elinac_elog/frames.pl E-LINAC Operations ELOG]

[https://mis.triumf.ca/science/schedules.jsf Beam schedule]

[https://web.accel.triumf.ca/isac_elog/frames.pl ISAC Operations ELOG]

[https://wps.triumf.ca/wps_master/wps_frames.pl Work Permit System]

[https://mis.triumf.ca/track/workrequest/create/request.jsf?create=true Work Requests]

[https://mis.triumf.ca/science/planning/yield/beam Yield data base]

[https://mis.triumf.ca/admin/dose/terminal.jsf Dosimeter sign-OUT/IN]

[https://documents.triumf.ca/docushare/dsweb/HomePage Docushare]

[https://documents.triumf.ca/docushare/dsweb/View/Collection-12449 Number of hours beam was delivered]

[https://forms.office.com/Pages/ResponsePage.aspx?id=EDUFwrOceUai049ELgO1h2WQuVz4bnFBoS0U0OSUAw5UQkZCTVA2QkZLSEZKVUFORzFUVTBDTzlXMC4u Link to User survey]

==Members==
[[Members]]

== Getting started ==
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:Configuration_settings Configuration settings list]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:FAQ MediaWiki FAQ]
* [https://lists.wikimedia.org/postorius/lists/mediawiki-announce.lists.wikimedia.org/ MediaWiki release mailing list]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Localisation#Translation_resources Localise MediaWiki for your language]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:Combating_spam Learn how to combat spam on your wiki]

Closeoutmeeting S1819

2022-06-20T16:15:56Z

Lennarz:

*Total number of delivered shifts as reported by Ops: 24hrs of SIB. 0hrs of RIB.
*https://documents.triumf.ca/docushare/dsweb/View/Collection-12449

Main Page

2022-06-20T16:12:33Z

Lennarz: /* Useful Links */

Welcome to the Nuclear Science Specialists Group wiki page!

Consult the [https://www.mediawiki.org/wiki/Special:MyLanguage/Help:Contents User's Guide] for information on using the wiki software.

==General==

[[xyz1]]

[[xyz2]]

[[xyz3]]

==Inventory==

[[test1]]

==Useful information==

[[beamline specs]]

==Experiments==

[[TUDA-I]]

[[TUDA-II]]

[[ANASEN]]

[[BeEST]]

==Documentation==
[[Released Documents]]

[[Other Documents]]

[[Logbook]]

[[Meeting Minutes]]

[[Procedures]]

==Useful Links==
[https://web.accel.triumf.ca/elinac_elog/frames.pl E-LINAC Operations ELOG]

[https://mis.triumf.ca/science/schedules.jsf Beam schedule]

[https://web.accel.triumf.ca/isac_elog/frames.pl ISAC Operations ELOG]

[https://wps.triumf.ca/wps_master/wps_frames.pl Work Permit System]

[https://mis.triumf.ca/track/workrequest/create/request.jsf?create=true Work Requests]

[https://mis.triumf.ca/science/planning/yield/beam Yield data base]

[https://mis.triumf.ca/admin/dose/terminal.jsf Dosimeter sign-OUT/IN]

[https://documents.triumf.ca/docushare/dsweb/HomePage Docushare]

[https://documents.triumf.ca/docushare/dsweb/View/Collection-12449 Number of hours beam was delivered]

==Members==
[[Members]]

== Getting started ==
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:Configuration_settings Configuration settings list]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:FAQ MediaWiki FAQ]
* [https://lists.wikimedia.org/postorius/lists/mediawiki-announce.lists.wikimedia.org/ MediaWiki release mailing list]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Localisation#Translation_resources Localise MediaWiki for your language]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:Combating_spam Learn how to combat spam on your wiki]

Closeoutmeeting S1819

2022-06-20T16:11:44Z

Lennarz: Created page with "*Total number of delivered shifts as reported by Ops: 24hrs. *https://documents.triumf.ca/docushare/dsweb/View/Collection-12449"

*Total number of delivered shifts as reported by Ops: 24hrs.
*https://documents.triumf.ca/docushare/dsweb/View/Collection-12449

Meeting Minutes

2022-06-20T16:11:19Z

Lennarz:

Meeting Minutes

2022-06-16T20:30:20Z

Lennarz:

{| class="wikitable"
!colspan="11"|Meeting minutes
|-
|'''Date'''
|'''Author'''
|'''Minutes'''
|-
|2022-06-10
|Annika
|[[Closeoutmeeting_June10th2022 | Minutes S1880]]
|-
|yyyy-mm-dd
|xxx
|[[xxx | Minutes]]
|-
|yyyy-mm-dd
|xxx
|[[xxx | Minutes]]
|}

Vacuum and Epics

2022-06-16T01:54:35Z

Lennarz: /* No window (fast pump down) */

=Login=
*To bring up epics, ask Annika or Martin for access to isacepics login.

=Navigation=
*From the main menu, go to "vacuum2->HEBT-GP3" to open the ANASEN vacuum page (called HEBT-GP3 Vacuum)

[[File:epicsmenu.png|600px|thumb|center|Epics menu]]

[[File:hebtgp3.png|600px|thumb|center|HEPT-GP3 vacuum page]]

*To view conditions of upstream beamline, click the "HEBT" button on the left of the page.

[[File:hebt3vacuum.png|thumb|center|600px|HEBT3 Vacuum]]

=Pump down=

[[File:HEBT_valves.jpg|500px|thumb|center|HEBT valves position.]]

[[File:HEBT_valves2.jpg|500px|thumb|center|Manual valve - HEBT:MV19.]]

===No window (fast pump down)===
*For fast pump down, make sure the manual valve is fully open
*Close HEBT:VV19 (if open)
*Start HEBT:RP19 and observe pressure on HEBT:CG19B
*Once HEBT:CG19B is showing a reading below 50mTorr, open HEBT:PB19
*

===With window (slow pump down)===

=Venting=
==No window (slow venting procedure)==

==With window (fast venting procedure)==

Vacuum and Epics

2022-06-16T01:45:17Z

Lennarz: /* Pump down */

=Login=
*To bring up epics, ask Annika or Martin for access to isacepics login.

=Navigation=
*From the main menu, go to "vacuum2->HEBT-GP3" to open the ANASEN vacuum page (called HEBT-GP3 Vacuum)

[[File:epicsmenu.png|600px|thumb|center|Epics menu]]

[[File:hebtgp3.png|600px|thumb|center|HEPT-GP3 vacuum page]]

*To view conditions of upstream beamline, click the "HEBT" button on the left of the page.

[[File:hebt3vacuum.png|thumb|center|600px|HEBT3 Vacuum]]

=Pump down=

[[File:HEBT_valves.jpg|500px|thumb|center|HEBT valves position.]]

[[File:HEBT_valves2.jpg|500px|thumb|center|Manual valve - HEBT:MV19.]]

===No window (fast pump down)===
*For fast pump down, make sure the manual valve is fully open
*Close HEBT:VV19 (if open)
*Start HEBT:RP19 and observe pressure on HEBT:CG19B

===With window (slow pump down)===

=Venting=
==No window (slow venting procedure)==

==With window (fast venting procedure)==

Vacuum and Epics

2022-06-16T01:43:17Z

Lennarz: /* Navigation */

Vacuum and Epics

2022-06-16T01:42:31Z

Lennarz: /* Pump down */

=Login=
*To bring up epics, ask Annika or Martin for access to isacepics login.

=Navigation=
*From the main menu, go to "vacuum2->HEBT-GP3" to open the ANASEN vacuum page (called HEBT-GP3 Vacuum)

[[File:epicsmenu.png|600px|Epics menu]]

[[File:hebtgp3.png|600px|HEPT-GP3 vacuum page]]

*To view conditions of upstream beamline, click the "HEBT" button on the left of the page.

[[File:hebt3vacuum.png|600px|HEBT3 Vacuum]]

=Pump down=

[[File:HEBT_valves.jpg|500px|thumb|center|HEBT valves position.]]

[[File:HEBT_valves2.jpg|500px|thumb|center|Manual valve - HEBT:MV19.]]

===No window (fast pump down)===

===With window (slow pump down)===

=Venting=
==No window (slow venting procedure)==

==With window (fast venting procedure)==

Vacuum and Epics

2022-06-16T01:37:02Z

Lennarz: /* Pump down */

=Login=
*To bring up epics, ask Annika or Martin for access to isacepics login.

=Navigation=
*From the main menu, go to "vacuum2->HEBT-GP3" to open the ANASEN vacuum page (called HEBT-GP3 Vacuum)

[[File:epicsmenu.png|600px|Epics menu]]

[[File:hebtgp3.png|600px|HEPT-GP3 vacuum page]]

*To view conditions of upstream beamline, click the "HEBT" button on the left of the page.

[[File:hebt3vacuum.png|600px|HEBT3 Vacuum]]

=Pump down=

[[File:HEBT_valves.jpg|500px|thumb|HEBT valves position.]]

[[File:HEBT_valves2.jpg|500px|thumb|xxx]]

==No window (fast pump down)==

==With window (slow pump down)==

=Venting=
==No window (slow venting procedure)==

==With window (fast venting procedure)==

File:HEBT valves2.jpg

2022-06-16T01:33:17Z

Lennarz:

File:HEBT valves.jpg

2022-06-16T01:31:56Z

Lennarz:

Vacuum and Epics

2022-06-16T01:31:34Z

Lennarz: /* Pump down */

Vacuum and Epics

2022-06-16T01:31:22Z

Lennarz: /* Pump down */

Vacuum and Epics

2022-06-16T01:31:06Z

Lennarz: /* Pump down */

TUDA-I

2022-06-16T01:27:34Z

Lennarz: Created page with "Moving TUDA TUDA-I to-do list"

[[Moving TUDA]]

[[TUDA-I to-do list]]

Main Page

2022-06-16T01:25:47Z

Lennarz: /* Experiments */

Welcome to the Nuclear Science Specialists Group wiki page!

Consult the [https://www.mediawiki.org/wiki/Special:MyLanguage/Help:Contents User's Guide] for information on using the wiki software.

==General==

[[xyz1]]

[[xyz2]]

[[xyz3]]

==Inventory==

[[test1]]

==Useful information==

[[beamline specs]]

==Experiments==

[[TUDA-I]]

[[TUDA-II]]

[[ANASEN]]

[[BeEST]]

==Documentation==
[[Released Documents]]

[[Other Documents]]

[[Logbook]]

[[Meeting Minutes]]

[[Procedures]]

==Useful Links==
[https://web.accel.triumf.ca/elinac_elog/frames.pl E-LINAC Operations ELOG]

[https://mis.triumf.ca/science/schedules.jsf Beam schedule]

[https://web.accel.triumf.ca/isac_elog/frames.pl ISAC Operations ELOG]

[https://wps.triumf.ca/wps_master/wps_frames.pl Work Permit System]

[https://mis.triumf.ca/track/workrequest/create/request.jsf?create=true Work Requests]

[https://mis.triumf.ca/science/planning/yield/beam Yield data base]

[https://mis.triumf.ca/admin/dose/terminal.jsf Dosimeter sign-OUT/IN]

[https://documents.triumf.ca/docushare/dsweb/HomePage Docushare]

==Members==
[[Members]]

== Getting started ==
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:Configuration_settings Configuration settings list]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:FAQ MediaWiki FAQ]
* [https://lists.wikimedia.org/postorius/lists/mediawiki-announce.lists.wikimedia.org/ MediaWiki release mailing list]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Localisation#Translation_resources Localise MediaWiki for your language]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:Combating_spam Learn how to combat spam on your wiki]

Main Page

2022-06-16T01:25:21Z

Lennarz: /* Experiments */

Welcome to the Nuclear Science Specialists Group wiki page!

Consult the [https://www.mediawiki.org/wiki/Special:MyLanguage/Help:Contents User's Guide] for information on using the wiki software.

==General==

[[xyz1]]

[[xyz2]]

[[xyz3]]

==Inventory==

[[test1]]

==Useful information==

[[beamline specs]]

==Experiments==

[[TUDA-I]]

[[TUDA-II]]

[[ANASEN]]

==Documentation==
[[Released Documents]]

[[Other Documents]]

[[Logbook]]

[[Meeting Minutes]]

[[Procedures]]

==Useful Links==
[https://web.accel.triumf.ca/elinac_elog/frames.pl E-LINAC Operations ELOG]

[https://mis.triumf.ca/science/schedules.jsf Beam schedule]

[https://web.accel.triumf.ca/isac_elog/frames.pl ISAC Operations ELOG]

[https://wps.triumf.ca/wps_master/wps_frames.pl Work Permit System]

[https://mis.triumf.ca/track/workrequest/create/request.jsf?create=true Work Requests]

[https://mis.triumf.ca/science/planning/yield/beam Yield data base]

[https://mis.triumf.ca/admin/dose/terminal.jsf Dosimeter sign-OUT/IN]

[https://documents.triumf.ca/docushare/dsweb/HomePage Docushare]

==Members==
[[Members]]

== Getting started ==
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:Configuration_settings Configuration settings list]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:FAQ MediaWiki FAQ]
* [https://lists.wikimedia.org/postorius/lists/mediawiki-announce.lists.wikimedia.org/ MediaWiki release mailing list]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Localisation#Translation_resources Localise MediaWiki for your language]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:Combating_spam Learn how to combat spam on your wiki]

Raspberry Pi

2022-06-16T01:18:06Z

Lennarz:

Raspberry Pi

2022-06-16T01:11:26Z

Lennarz: /* Login */

*The vacuum chamber upstream of the ANASEN main chamber is used to mount beam tuning diagnostics; a silicon detector and a phosphor screen.
*The silicon and the phosphor screen are mounted next to each other on a manual drive.
*

=Connecting the camera=
*The little ribbon cables are a little tricky. They have to be inserted in a particular orientation. The best way to see is just to look at where the metal pins are on the cable and line that up to the contacts.
*The LED mounted next to the camera takes 5V (lemo connection)
*There is a micro-HDMI on the raspberry pi. Use the ethernet port to talk to the pi.
*Connect the Raspberry Pi directly to monitor, mouse and keyboard.

[[File:raspberrypi_1.jpg|500px|Raspberry Pi.]]

[[File:raspberrypi.jpg|500px|Raspberry Pi connection at flange.]]

=Login=
*The raspberry pi is running raspberry pi OS (previously Raspbian) and is based on debian linux
*To connect to the pi remotely (provided it is registered on the network and connected to the ethernet), open a shell and ssh into it:
<code>ssh -Y pi@anasen01.triumf.ca</code>
*Or login directly when monitor, mouse and keyboard are attached to the pi
*Ask Annika or Martin for password

*Open a terminal
*To run the camera.py script do:

<code>raspivid -t 0</code>

*You can change zoom settings in the python script

ANASEN

2022-06-16T01:06:25Z

Lennarz:

[[Vacuum and Epics]]

[[Alignment]]

[[Raspberry Pi]]

[[Gas system]]

[[Epics Scalers]]

ANASEN

2022-06-16T01:05:49Z

Lennarz:

[[Vacuum and Epics]]

[[Alignment]]

[[Raspberry Pi]]

[[Gas system]]

Raspberry Pi

2022-06-16T01:04:55Z

Lennarz: /* Connecting the camera */

*The vacuum chamber upstream of the ANASEN main chamber is used to mount beam tuning diagnostics; a silicon detector and a phosphor screen.
*The silicon and the phosphor screen are mounted next to each other on a manual drive.
*

=Connecting the camera=
*The little ribbon cables are a little tricky. They have to be inserted in a particular orientation. The best way to see is just to look at where the metal pins are on the cable and line that up to the contacts.
*The LED mounted next to the camera takes 5V (lemo connection)
*There is a micro-HDMI on the raspberry pi. Use the ethernet port to talk to the pi.
*Connect the Raspberry Pi directly to monitor, mouse and keyboard.

[[File:raspberrypi_1.jpg|500px|Raspberry Pi.]]

[[File:raspberrypi.jpg|500px|Raspberry Pi connection at flange.]]

=Login=
<code>ssh -Y pi@anasen01.triumf.ca</code>
*Ask Annika or Martin for password

*Open a terminal
*To run the camera.py script do:

<code>raspivid -t 0</code>

*You can change zoom settings in the python script

Raspberry Pi

2022-06-16T01:00:50Z

Lennarz: /* Connecting the camera */

=Connecting the camera=
*The little ribbon cables are a little tricky. They have to be inserted in a particular orientation. The best way to see is just to look at where the metal pins are on the cable and line that up to the contacts.
*The LED mounted next to the camera takes 5V (lemo connection)
*There is a micro-HDMI on the raspberry pi. Use the ethernet port to talk to the pi.
*Connect the Raspberry Pi directly to monitor, mouse and keyboard.

[[File:raspberrypi_1.jpg|500px|Raspberry Pi.]]

[[File:raspberrypi.jpg|500px|Raspberry Pi connection at flange.]]

=Login=
<code>ssh -Y pi@anasen01.triumf.ca</code>
*Ask Annika or Martin for password

*Open a terminal
*To run the camera.py script do:

<code>raspivid -t 0</code>

*You can change zoom settings in the python script

File:Raspberrypi 1.jpg

2022-06-16T00:59:27Z

Lennarz:

Raspberry Pi

2022-06-16T00:59:14Z

Lennarz:

=Connecting the camera=
*The little ribbon cables are a little tricky. They have to be inserted in a particular orientation. The best way to see is just to look at where the metal pins are on the cable and line that up to the contacts.
*The LED mounted next to the camera takes 5V (lemo connection)
*There is a micro-HDMI on the raspberry pi. Use the ethernet port to talk to the pi.

[[File:raspberrypi_1.jpg|500px|Raspberry Pi.]]

[[File:raspberrypi.jpg|500px|Raspberry Pi connection at flange.]]

=Login=
<code>ssh -Y pi@anasen01.triumf.ca</code>
*Ask Annika or Martin for password

*Open a terminal
*To run the camera.py script do:

<code>raspivid -t 0</code>

*You can change zoom settings in the python script

Raspberry Pi

2022-06-16T00:58:25Z

Lennarz:

=Connecting the camera=
*The little ribbon cables are a little tricky. They have to be inserted in a particular orientation. The best way to see is just to look at where the metal pins are on the cable and line that up to the contacts.
*The LED mounted next to the camera takes 5V (lemo connection)
*There is a micro-HDMI on the raspberry pi. Use the ethernet port to talk to the pi.

[[File:raspberrypi.jpg|500px|Raspberry Pi connection at flange.]]

=Login=
<code>ssh -Y pi@anasen01.triumf.ca</code>
*Ask Annika or Martin for password

*Open a terminal
*To run the camera.py script do:

<code>raspivid -t 0</code>

*You can change zoom settings in the python script

File:Raspberrypi.jpg

2022-06-16T00:57:32Z

Lennarz:

Raspberry Pi

2022-06-16T00:57:00Z

Lennarz: /* Connecting the camera */

=Connecting the camera=
*The little ribbon cables are a little tricky. They have to be inserted in a particular orientation. The best way to see is just to look at where the metal pins are on the cable and line that up to the contacts.
*The LED mounted next to the camera takes 5V (lemo connection)
*There is a micro-HDMI on the raspberry pi. Use the ethernet port to talk to the pi.

[[File:raspberrypi.jpg|Raspberry Pi connection at flange.]]

=Login=
<code>ssh -Y pi@anasen01.triumf.ca</code>
*Ask Annika or Martin for password

*Open a terminal
*To run the camera.py script do:

<code>raspivid -t 0</code>

*You can change zoom settings in the python script

Vacuum and Epics

2022-06-14T16:44:52Z

Lennarz:

File:Hebt3vacuum.png

2022-06-14T16:41:38Z

Lennarz:

Vacuum and Epics

2022-06-14T16:41:26Z

Lennarz: /* Navigation */

File:Epicsmenu.png

2022-06-14T16:39:42Z

Lennarz:

Vacuum and Epics

2022-06-14T16:39:29Z

Lennarz: /* Navigation */

=Login=
*To bring up epics, ask Annika or Martin for access to isacepics login.

=Navigation=
*From the main menu, go to "vacuum2->HEBT-GP3" to open the ANASEN vacuum page (called HEBT-GP3 Vacuum)
*To view conditions of upstream beamline, click the "HEBT" button on the left of the page.

[[File:epicsmenu.png|600px|Epics menu]]

[[File:hebtgp3.png|600px|HEPT-GP3 vacuum page]]

=Pump down=
==No window==

==With window==

=Venting=
==No window==

==With window==

Vacuum and Epics

2022-06-14T16:37:43Z

Lennarz:

=Login=
*To bring up epics, ask Annika or Martin for access to isacepics login.

=Navigation=
*From the main menu, go to "vacuum2->HEBT-GP3" to open the ANASEN vacuum page (called HEBT-GP3 Vacuum)
*To view conditions of upstream beamline, click the "HEBT" button on the left of the page.

[[File:hebtgp3.png|600px|HEPT-GP3 vacuum page]]

=Pump down=
==No window==

==With window==

=Venting=
==No window==

==With window==

File:Hebtgp3.png

2022-06-14T16:35:42Z

Lennarz:

Vacuum and Epics

2022-06-14T16:35:26Z

Lennarz: /* Navigation */

=Login=
*To bring up epics, ask Annika or Martin for access to isacepics login.

=Navigation=
*From the main menu, go to "vacuum2->HEBT-GP3" to open the ANASEN vacuum page (called HEBT-GP3 Vacuum)
*To view conditions of upstream beamline, click the "HEBT" button on the left of the page.

[[File:hebtgp3.png|HEPT-GP3 vacuum page]]

=Pump down=
==No window==

==With window==

=Venting=
==No window==

==With window==

Closeoutmeeting June10th2022

2022-06-14T16:33:28Z

Lennarz: Created page with "Present: MA, TA, SK, FS, AL *Close out meeting after DRAGON HPGe run S1880 *Hours delivered: 93hr. FS agrees with Ops. No major interruptions from beam delivery side *Took data on one energy, 1 data point *Received ~6e12 pps. Next run, we need to push for close to 1e13 pps *Miscommunication on DRAGON side about start on resonance *SK mentions that Keerthi suspects source condition to be the issue. Source hasn't been cleaned before start up *Should remember to schedule n..."

Present: MA, TA, SK, FS, AL

*Close out meeting after DRAGON HPGe run S1880
*Hours delivered: 93hr. FS agrees with Ops. No major interruptions from beam delivery side
*Took data on one energy, 1 data point
*Received ~6e12 pps. Next run, we need to push for close to 1e13 pps
*Miscommunication on DRAGON side about start on resonance
*SK mentions that Keerthi suspects source condition to be the issue. Source hasn't been cleaned before start up
*Should remember to schedule next S1880 shifts early in the year to start with clean source
*SK to email Chris, Keerthi, Friedhelm regarding OLIS
*For DRAGON, Ops should always monitor mass slit current. This should be a standard diagnostic. If Ops have that signal, it's less likely for DRAGON experimenters to forget to set gains properly.
*Miscommunication: Request for buncher was unexpected as it was said it was not needed in beam delivery meeting. However, during experiment, it was requested, even though it was DC energy. Likely confusion as to whether this was resonant energy or not.
*Run plan from PI was not communicated to Ops. Thus, resonant energy was never delivered

Meeting Minutes

2022-06-14T16:25:53Z

Lennarz:

Meeting Minutes

2022-06-14T16:24:29Z

Lennarz:

{| class="wikitable"
!colspan="11"|Meeting minutes
|-
|'''Date'''
|'''Author'''
|'''Minutes'''
|-
|2022-06-10
|Annika
|[[Closeoutmeeting_June10th2022 | Minutes]]
|-
|yyyy-mm-dd
|xxx
|[[xxx | Minutes]]
|}

Main Page

2022-06-10T23:42:40Z

Lennarz: /* Inventory */

Welcome to the Nuclear Science Specialists Group wiki page!

Consult the [https://www.mediawiki.org/wiki/Special:MyLanguage/Help:Contents User's Guide] for information on using the wiki software.

==General==

[[xyz1]]

[[xyz2]]

[[xyz3]]

==Inventory==

[[test1]]

==Useful information==

[[beamline specs]]

==Experiments==

[[TUDA-II]]

[[ANASEN]]

==Documentation==
[[Released Documents]]

[[Other Documents]]

[[Logbook]]

[[Meeting Minutes]]

[[Procedures]]

==Useful Links==
[https://web.accel.triumf.ca/elinac_elog/frames.pl E-LINAC Operations ELOG]

[https://mis.triumf.ca/science/schedules.jsf Beam schedule]

[https://web.accel.triumf.ca/isac_elog/frames.pl ISAC Operations ELOG]

[https://wps.triumf.ca/wps_master/wps_frames.pl Work Permit System]

[https://mis.triumf.ca/track/workrequest/create/request.jsf?create=true Work Requests]

[https://mis.triumf.ca/science/planning/yield/beam Yield data base]

[https://mis.triumf.ca/admin/dose/terminal.jsf Dosimeter sign-OUT/IN]

[https://documents.triumf.ca/docushare/dsweb/HomePage Docushare]

==Members==
[[Members]]

== Getting started ==
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:Configuration_settings Configuration settings list]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:FAQ MediaWiki FAQ]
* [https://lists.wikimedia.org/postorius/lists/mediawiki-announce.lists.wikimedia.org/ MediaWiki release mailing list]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Localisation#Translation_resources Localise MediaWiki for your language]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:Combating_spam Learn how to combat spam on your wiki]

Main Page

2022-06-10T23:42:25Z

Lennarz: /* Inventory */

Welcome to the Nuclear Science Specialists Group wiki page!

Consult the [https://www.mediawiki.org/wiki/Special:MyLanguage/Help:Contents User's Guide] for information on using the wiki software.

==General==

[[xyz1]]

[[xyz2]]

[[xyz3]]

==Inventory==

[[test1]]

[[File:bla.jpg|caption]]

==Useful information==

[[beamline specs]]

==Experiments==

[[TUDA-II]]

[[ANASEN]]

==Documentation==
[[Released Documents]]

[[Other Documents]]

[[Logbook]]

[[Meeting Minutes]]

[[Procedures]]

==Useful Links==
[https://web.accel.triumf.ca/elinac_elog/frames.pl E-LINAC Operations ELOG]

[https://mis.triumf.ca/science/schedules.jsf Beam schedule]

[https://web.accel.triumf.ca/isac_elog/frames.pl ISAC Operations ELOG]

[https://wps.triumf.ca/wps_master/wps_frames.pl Work Permit System]

[https://mis.triumf.ca/track/workrequest/create/request.jsf?create=true Work Requests]

[https://mis.triumf.ca/science/planning/yield/beam Yield data base]

[https://mis.triumf.ca/admin/dose/terminal.jsf Dosimeter sign-OUT/IN]

[https://documents.triumf.ca/docushare/dsweb/HomePage Docushare]

==Members==
[[Members]]

== Getting started ==
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:Configuration_settings Configuration settings list]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:FAQ MediaWiki FAQ]
* [https://lists.wikimedia.org/postorius/lists/mediawiki-announce.lists.wikimedia.org/ MediaWiki release mailing list]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Localisation#Translation_resources Localise MediaWiki for your language]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:Combating_spam Learn how to combat spam on your wiki]

Vacuum and Epics

2022-06-10T23:40:40Z

Lennarz: /* Navigation */

=Login=
*To bring up epics, ask Annika or Martin for access to isacepics login.

=Navigation=
*From the main menu, go to "vacuum2->HEBT-GP3" to open the ANASEN vacuum page (called HEBT-GP3 Vacuum)
*To view conditions of upstream beamline, click the "HEBT" button on the left of the page.

=Pump down=
==No window==

==With window==

=Venting=
==No window==

==With window==

Vacuum and Epics

2022-06-10T23:39:55Z

Lennarz: /* Navigation */

=Login=
*To bring up epics, ask Annika or Martin for access to isacepics login.

=Navigation=
*From the main menu, go to "vacuum2->HEBT-GP3" to open the ANASEN vacuum page (called HEBT-GP3 Vacuum)
*To view conditions of upstream beamline, click the "HEBT" button on the left of the page.

[[File:example.jpg|caption]]

=Pump down=
==No window==

==With window==

=Venting=
==No window==

==With window==

Raspberry Pi

2022-06-10T23:37:07Z

Lennarz: /* Login */

=Connecting the camera=
*The little ribbon cables are a little tricky. They have to be inserted in a particular orientation. The best way to see is just to look at where the metal pins are on the cable and line that up to the contacts.
*The LED mounted next to the camera takes 5V (lemo connection)
*There is a micro-HDMI on the raspberry pi. Use the ethernet port to talk to the pi.

=Login=
<code>ssh -Y pi@anasen01.triumf.ca</code>
*Ask Annika or Martin for password

*Open a terminal
*To run the camera.py script do:

<code>raspivid -t 0</code>

*You can change zoom settings in the python script